Reasons Your Hot Water Heater Isn't Working
Reasons Your Hot Water Heater Isn't Working
Blog Article
We've uncovered this post pertaining to What Would Cause My Electric Water Heater to Stop Working? listed below on the net and concluded it made sense to relate it with you on this page.
Many modern-day houses use an electric hot water heater for their heating unit, due to its comfort and simplicity of use. However, much like any other electrical home appliances, issues might occur with its use, unexpectedly. It can be actually frustrating to get up to a cool shower instead of a hot one or having your bathroom with water that isn't hot adequate or even as well warm. Whatever the situation might be, water heater issues can be fairly nerve-racking. Thankfully, we have actually made a list of possible remedies to your water heater problems. There are a variety of elements that might create a number of these troubles, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you switch off the main power supply for safety. Whatever the issue is, getting it dealt with should not position excessive of a concern if you follow these steps:
Inspect Your Power Supply:
As standard as this might seem, it is extremely needed. Without ample power, your water heater will not work. So the first thing to do when your water instantly stops working is to confirm that it isn't a power issue. Inspect if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, just transform it on and off once more. Replace any damaged or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's now working.
Check the Heating Element in the Hot Water Heater:
If it's not a power trouble, after that attempt looking into your burner if it is still functioning. Examine each of your burner to make sure the issue isn't with any of them. If any of them is defective, change that component and afterwards examine whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm sufficient, you might need to check the temperature settings on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open up the access panel and press the red button for temperature reset over the thermostat. This must aid warm the water. Transform the breaker back on and also check if the problem has been dealt with.
Call A Professional:
If after replacing all faulty parts and resetting your temperature, the water heater still isn't working, you may need to contact a specialist plumber for a specialist opinion. The trouble with your heating system could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water needed in your home. Whatever the case may be, a specialist plumber would certainly aid address the trouble.
Verdict
Hot water heater issues are not always major. A lot of them are due to minor concerns like a blown fuse or damaged burner. Replacing the defective components must do the trick. However, if you are still incapable to fix the problem, give a call to your local plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I recently found that blog post about What Would Cause My Electric Water Heater to Stop Working? while perusing the web. Those who appreciated our article kindly remember to share it. Many thanks for your time. Don't forget to stop by our site back soon.
Check Us Out
Report this page